"There's lots of flexibility in how we use the resources while also maintaining a small footprint."
"The high performance is very valuable, as well as the enterprise reliability features."
"We have been able to consolidate storage into Pavilion. Pavilions are our only SANs because it is a bring your own disk solution. When new drives come out, we are able to take out half of the drives in the system, put in new drives, move our VMs over to the new drives, take the other drives out, and populate those with new drives. Then, we are suddenly twice as dense as we were before. NVMe flash is only going to get denser and cheaper so we can make use of that every couple of years by just throwing newer disks into it at a fraction of the cost of a new SAN."
"The performance is very good on our servers. It's superior. And the QoS capabilities for providing work congestion protection are also important because about 99 percent of our servers are production servers."
"PowerMax NVMe has made it a lot easier to understand how much we are able to provision. It has made it a lot faster to provision new things. 90% of my time for provisioning has been reduced. Also, it has made it very easy to understand and see everything behind it versus the older heritage, where Dell EMC was very convoluted and hard to get working. Things that used to take an hour, probably now take five to 10 minutes."
"The SRDF site-to-site replication for the volumes is the most important feature for us. That enables us to do site recovery and replication for our VMware infrastructure."
"The compression and deduplication are always on. We get more than 4:1 capacity savings using them. The efficiency benefits from compression and deduplication are through a specialized hardware module within the storage itself, and that means there is no overhead to the compression and dedupe."
"We find the service level option to provision storage very valuable. The ability to define different service levels for storage groups helps us in prioritizing our workload at the infrastructure level."
"There is no management overhead involved in optimizing performance. It does it so well on its own. We don't have to manage much at all. It really is like a set it and forget it solution. My storage engineers love the system. It is a lot less work than our previous systems, which weren't bad by any means. There is not nearly as much management as before. So, we are saving dozens of hours per month for our storage team, and that is a real cost in our business."
"The UI is very easy to use. We can add volumes and manage them easily."
"The performance is very good. Our predominant workloads are all less than 5 milliseconds and it's most common to have a sub-1-millisecond response time for our applications. In terms of efficiency, we've turned on compression and we're able to get as high as two-to-one compression on our workloads, on average."
"I like how it separates the iSCSI drives from the standard shares. It has two different routes to it. I know most of the other solutions do this, but I just like the way that Dell EMC does it."
"The most valuable feature is the dynamic cache of this product. It is very important. We have the physical cache and we can boost this cache using disks. All the products are mainly flash now and this is one of the main characteristics which our customers like."
"I have found Dell EMC Unity XT to be stable."
"Integration is easy with this product."
"I have had no problem at all. I think this is one of the most important things. It is very good. Maintaining it and deploying updates require very low maintenance. We haven't had problems. We had to replace a couple of disks in all these years, but it was pretty straightforward."
"My storage team likes Unity's replication features. Three-site replication is a unique feature that EMC offers us."
"Initial setup is a simple process."
"It is definitely one of the most robust, solid, well-performing products that I have dealt with. It is set it and forget it, which is pretty amazing."
"The rail system that Pavilion uses to mount up into a standard Dell or APC cabinet extends further back than normal rails, and they cover up the zero PDU slot. So, I don't like the rail system that comes with the device. That is my biggest complaint."
"I would like to see the management layer improved."
"In our current configuration, we can only run the line controllers in high availability, active-standby mode, whereas we would like to see active-active implemented."
"I think management is where PowerMax is weakest. We're still managing it like we managed EMC arrays in the early 2000s. There's a slicker, fancier GUI that does more things, but at the end of the day, you still have to dig into the command line and issue a lot of the same commands that we still were using almost 20 years ago."
"Although they call it unified storage where you have SAN and NAS, with a NAS implementation on top of a SAN, the NAS implementation is a little complicated and clumsy. As SAN, as block storage, it is very powerful... If they could provide a very good NAS implementation, it would be better, so that customers don't have to look for other simple solutions for NAS."
"The main feature that I personally want to see is the possibility to upgrade to the next generation without changing all the components and just change the engine, relying on the compatibility matrices between two different generations. Meaning that we could just keep the enclosure and upgrade the engine, integrating the enclosure to the existing pool, then adding automation tools for orchestration."
"We brought up this question to the implementation engineer. We were comparing use cases where a customer is using RecoverPoint, then goes to PowerMax. In our previous setup with XtremIO, we were using RecpverPoint and keeping snapshots for 30 days, every few seconds. With PowerMax, I requested this for every 15 minutes, keeping it for a week. The engineer's answer was, "There will be too many snapshots. It might slow down the system." This is specifically for the use cases where there is RecoverPoint. While PowerMax works with RecoverPoint, and you can use it, there should be some way where you can have even more snapshots and not to worry about performance and system cache."
"I would like to see more development in the cloud environment. It would be good if it comes in the cloud kind of setup."
"I would like a more informative CloudIQ for iOS. What you can see via the web UI significantly differs from what you can see via the web application."
"We have had some trouble with the VMAX-to-PowerMax migration, but the VMAX box will be powered down after the migration. The PowerMax boxes are working fine and we don't have any issues with them."
"They can make the GUI better, especially for the ones that come out of the box. We did encounter a bit of difficulty in setting up the storage. We had to deploy Solutions Enabler on a Linux machine to be able to fully interact with the storage. They need to upgrade the web interface for the management of the storage that comes out of the box. The management interface for NFS is also a bit old and not very intuitive."
"In terms of what could be improved, I would say the deduplication part, because for large deduplications, you need an extra appliance to do it in order to avoid having problems in performance. I think that could be improved, because everything should be included in the product, not with an appliance from the outside."
"One area of improvement is replication. We are also using Oracle virtual machines, and when you are using systems from other vendors, the process of replicating from Unity through OLVM is more laborious than when we were using VPLEX."
"The reporting should be better. In other systems, you can create many different kinds of reports but this is not the case with Dell."
"It could be a little easier to attach it to a network file system."
"The price of this product can be more cost-effective."
"We do a lot of VMware. It only integrates with VMware in one way, which is virtual volumes. I don't really have any visibility on anything else. From VMware, I can't look into Unity. From Unity, I can't look into VMware unless I am using virtual volumes, where they integrate together happily, but we are not using that. I would like better integration for non-virtual volume VMware use."
"In terms of what could be improved, I would say its capacity and its connection."
"It could go faster. Make it bigger, better, and faster at a lower price, and I am there."
Pavilion HyperParallel Data Platform
The Pavilion HyperParallel Data Platform™ dramatically accelerates what organizations achieve by delivering universally unmatched storage performance, in an incredibly compact solution while reducing data center costs and complexity. Unrivaled flexibility for multiple data types and protocols, along with broad ecosystem integration, ensure that every customer has choice and control.
What is the Pavilion HyperParallel Data Platform
The Pavilion HyperParallel Data Platform is comprised of the Pavilion HyperParallel Flash Array™ and Pavilion HyperOS™. The Pavilion HyperParallel Flash Array leverages a unique, switch-based architecture to create a multi-controller solution that delivers an unmatched combination of high performance, ultra-low latency, and storage density. Pavilion HyperOS is a powerful, purpose-built storage operating system designed to unlock the power of the multi-controller Pavilion HyperParallel Flash Array, which delivers scalability and flexibility that no other solution can offer.
Pavilion HyperParallel Data Platform Data Sheet
Download the Pavilion HyperParallel Data Platform data sheet. Updated: December 2020
Dell EMC PowerMax is the world’s fastest storage array. It delivers new levels of performance and efficiency with a future-proof architecture that features end-to-end non-volatile memory express (NVMe) and a built-in machine learning engine. PowerMax is built on the comprehensive functionality and proven resiliency of Dell EMC’s flagship storage platform. It is designed for six-nines of availability and offers data-at-rest encryption (D@RE), massive scalability, and best-in-class data protection with Symmetrix Remote Data Facility (SRDF), the gold standard in remote replication.
Dell EMC Unity, powered by Intel Xeon processors, delivers the ultimate in simplicity and value, enabling your organization to speed deployment, streamline management and seamlessly tier storage to the cloud.
Dell EMC Unity’s All-Flash and Hybrid Flash storage platforms optimize SSD performance and efficiency, with fully integrated SAN and NAS capabilities. Cloud-based storage analytics and proactive support keep you available and connected.
Dell EMC PowerMax NVMe is ranked 4th in All-Flash Storage Arrays with 16 reviews while Dell EMC Unity XT is ranked 5th in All-Flash Storage Arrays with 19 reviews. Dell EMC PowerMax NVMe is rated 9.0, while Dell EMC Unity XT is rated 8.8. The top reviewer of Dell EMC PowerMax NVMe writes "CloudIQ ensures that all our arrays are properly communicating so we can see performance and storage capacities". On the other hand, the top reviewer of Dell EMC Unity XT writes "We can do both block and file storage on one unit without purchasing a separate device". Dell EMC PowerMax NVMe is most compared with Dell EMC PowerStore, Pure Storage FlashArray, IBM FlashSystem, Hitachi Virtual Storage Platform F Series and Dell EMC XtremIO, whereas Dell EMC Unity XT is most compared with Dell EMC PowerStore, NetApp AFF (All Flash FAS), HPE Nimble Storage, Pure Storage FlashArray and HPE Primera. See our Dell EMC PowerMax NVMe vs. Dell EMC Unity XT report.
See our list of best All-Flash Storage Arrays vendors.
We monitor all All-Flash Storage Arrays reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.